Personal Computer
Accessories
Wireless Wii-U Pro Controller to USB Adapter
- Wirelessly connects your Wii U Pro controllers
to your PC by USB.
- Bluetooth v2.1 with EDR (enhanced data rate)
for superior wireless performance.
- Supports Turbo/Auto Fire function (see
“Operation Notes”)
- Supports the built-in Vibration Feedback with
no delays.
- Supports “Games for Windows” proprietary
input protocol.
- Functioning distance of up to 33 feet away
from adapter.
- Input Switch with 2 input protocol modes for
extra versatility.
- Direct Input (standard HID protocol) supports
4 controllers at the same time.
- Xinput (Xbox 360 controller protocol)
supports one controller per individual adapter.
- All buttons (except for “Power” button),
shoulder triggers, analog sticks and their ''click-in'' tops are
fully functional.
- Compatible with Windows 98,XP,Vista and
Windows 7 and Windows 8(32 bit and 64 bit versions)
HOW TO SET UP:
- Step 1: Install the driver software from the
included CD.
- Step 2: Plug the adapter into an empty USB
slot on your PC.
- Step 3: For the initial syncing, press the
“SYNC” button on the adapter itself and on the bottom of your
controller, you’ll find that the blue LEDs on your controller and
the red LED on the adapter will flash quickly. Once the syncing
process is complete, the LED on the adapter and your controller will
stay lit. If set to DINPUT mode, the "Player Number" LEDs on your
controllers will light up in the order in which your controllers
have been synced to the adapter.
- Step 4: Switch to “DINPUT” or “XINPUT” mode
by using the switch located on the side.
- Step 5: To disconnect all controllers and
turn off the adapter, press the Power button on your controller for
2 seconds.
OPERATION NOTES:
How to set the Turbo function:
- To set Turbo for individual buttons, press
and hold the HOME button and the button you wish to set Turbo for.
To remove the setting for that specific button, press and hold the
HOME button and the button you previously set Turbo for. To clear
all Turbo settings for all buttons, quickly press the HOME button
twice within half of a second.
- If the Input Switch is set to the "Direct
Input" mode, the controllers are recognized as standard Human
Interface Device. Your controllers can be calibrated at the Windows
Gamepad Setup screen. Up to four controllers can be recognized by a
single adapter while in this mode.
- Setting the switch to "Xinput Mode" will make
it possible to fool certain PC games which lock out proper input
modes from the user unless an Xbox controller is attached (for a
list of these games, check Wikipedia). While in Xinput Mode
Vibration Feedback is available. The drawback is that while in this
mode, only one controller can be recognized by the adapter.
- If you want to map your buttons to Keyboard
Keys, look for Joy2Key software online.
Click
here to check the price
All names, logos etc. are trademarks
of their respective companies. |
